• What is the typical range of a Wireless LAN ?

    The range of a residential Wi-Fi network depends on the wireless access point (WAP) or wireless router, its' antenna(s) sensitivity, as well as the exact 802.11 standard being used. Factors that determine a particular WAP or wireless router's range are:


    - the specific 802.11 protocol being used (802.11a/b/g/n)

    - the overall strength of the device transmitter

    - the nature of obstructions and interference in the surrounding area


    A general rule of thumb in home networking says that 802.11b/g WAPs and routers support a range of up to 150 feet (46 m) indoors and 300 feet (92 m) outdoors. Another rule of thumb holds that the effective range of 802.11a is approximately one-third that of 802.11b/g.


    802.11n devices typically have twice the range of 802.11b/g devices.


    All of these rough estimates fall on the high end of the range seen in practice. Obstructions in home such as brick walls and metal frames or siding can greatly reduce the range of a Wi-Fi LAN by 25% or more. Because 802.11a employs a higher signalling frequency than 802.11b/g/n, 802.11a is most susceptible to obstructions. Interference from microwave ovens, cordless phones and other equipment that operates in the same frequency as the WLAN also affects range.

    Kknow more @ microsoft office certification

    Of course, it's possible to extend a Wi-Fi LAN to much longer distances by chaining together multiple wireless access points or routers, or simply changnig to higher-gain directional antennas.


    Another benefit of 802.11n technology is much better coverage. Wireless-N devices use "reflections" of the signal (from walls, etc.) to strengthen it and eliminate cold or weak spots in the signal.

  • Commentaires

    Aucun commentaire pour le moment

    Suivre le flux RSS des commentaires

    Ajouter un commentaire

    Nom / Pseudo :

    E-mail (facultatif) :

    Site Web (facultatif) :

    Commentaire :